What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 02.07.2025 17:47

He then describes the function of a fuse.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
[image of Common-mode choke]
For this case there are devices called Metal oxide varistors (MOV).
This is where this question deviates from being a 'generic' question, and becomes more specific.
(Dc diagram shown, AC is similar).
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Three New Minerals Discovered in the Southwestern U.S. - Indian Defence Review
[old diagram got deleted by accident]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Edit 2024–10.
Why do women consider 80% of men as unattractive?
But it can get overloaded, and no longer works.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
He then describes Rainy Season and Lightning.
Billionaire YouTuber MrBeast ‘borrowing’ money from mom for his wedding - New York Post
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
I post the exact comment here.
nine
There are two important concepts here.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
'King of the Hill' Reboot First Details: Hank, Peggy, Bobby, Dale - Variety
Barnstars:
but this device (an Inductor) … impedes the rapid changes in the current.
Here is a simplified AC power diagram.
Here's Where Traders Expect Broadcom Stock to Go After Earnings - Investopedia
a photo is worth a thousand words.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
A fuse is a non-resetable over current circuit protector.
Was the EU formed to hurt the US as Trump claims?
Now when you have a certain ac resistance, then a current flows in a loop.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
This one hit behind the barn.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
In schematic diagrams this is the symbol for a fuse:
At one ohm, the resistor has a maximum of 1 watt power.
Can AI render a high resolution image from a low resolution image?
So, the voltage could go up to 500 volts, and the fuse will not open up.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
At least they know the answer if they wanted it.
Why do I sweat a great deal while exercising the same on some days and not so much on others?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
When do you start "growing old"?
One
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
This device then solves the entire problem.
But… the neutral is now “floating” because of the 1 ohm resistance.
There are three different concepts here that are getting confused.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
2024–10–10[John johnson John Johnson ]
The MOV will conduct when the voltage exceeds 50% of line voltage.
One is “what exactly is in a ‘surge protector’ ? ”
2024–10–16 [ OO OLAOYE OYEBODE ]
2024–10–14 [Omar Gharbi Omar Gharbi ]
These are simplified answers to the original question, and does not change anything I wrote above.
The third is lightning and “how it gets conducted into a home.”
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
What does a fuse do?
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
the problem then depends on "how fast does the fuse operate?".
This is 'the assistant's answer'
The bolt then partially travels down the line to your home.
First Sentence:
This is where the MOV conducts again, and dissipated the energy.
Because the load is inductive, the current lags the voltage.(by a bit).
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
what exactly is a ‘surge’ protector?
It seems Mohan does not understand the difference between a comment and an Answer.
What is lightning?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
eight
so, what happens?
A circuit breaker is similar, but is resettable.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
An AC voltage/ current source, and an ac inductive load.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Upvotes:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
The other is “what does a “fuse” do?”
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
but I think this circuit , shows a few more pieces.
He then asserts :
It also is a device that limits the change in current flow.
Can the fuse protect the electronic devices from lightning instead of a surge protector.